Below are the fittings for use
with JF type ground anchors. They are not suitable for the
standard ED range.
Approximate size: 100mm x 65mm
Material: Steel 50mm wide, 3mm thick.
Holes: 8.5mm
£3.40
Approximate size: 100mm x 85mm
Material: Steel 50mm wide, 5mm thick.
Holes: 8.5mm
£4.75
T505
Fitting
for JF range and Low Profile Safety
Suitable only for the 50mm JF anchors and low profile equestrian
anchors
Approximate size: 120mm x 100mm
Material: Steel 100mm wide, 5mm thick.
Holes: 10mm
£7.50
Its principle application is to secure light aircraft and gliders. It is fully described in the Aircraft tiedown page.
Approximate size: 220mm x 100mm
Ring dameter: 100mm.
£17.25
P503 Erdanker® JF Fitting
Suitable only for the 30mm JF anchorsApproximate size: 100mm x 65mm
Material: Steel 50mm wide, 3mm thick.
Holes: 8.5mm
£3.40
P506 Erdanker JF Fitting
Suitable only for the 40mm JF anchorsApproximate size: 100mm x 85mm
Material: Steel 50mm wide, 5mm thick.
Holes: 8.5mm
£4.75
T505
Fitting
for JF range and Low Profile Safety
range
Suitable only for the 50mm JF anchors and low profile equestrian
anchors
Approximate size: 120mm x 100mm
Material: Steel 100mm wide, 5mm thick.
Holes: 10mm
£7.50
W505 Fitting for use with 2 low profile anchors.
A heavy duty anchor point, it has a 'lay flat' ring which reduces any risk of tyre damage.Its principle application is to secure light aircraft and gliders. It is fully described in the Aircraft tiedown page.
Approximate size: 220mm x 100mm
Ring dameter: 100mm.
£17.25
